Melina Velba With Santa Clause

foto bella list of ingredients & a little tutorial advance

foto bella material requirements & a little tutorial in advance ....

Thanks for the great response to the camera bag. I have spent the last few weeks rumprobiert so much, sewn, designed and discarded it photographed every single step and described, consult with colleagues, Texsteine installed, modified, corrected and edited. Püha! Since I am pleased, of course, thrilled that my work comes across as much Begesisterung! Now the e-book is finished! It is being tested for heart and kidneys of the sample garment workers, so that foto bella from Thursday the 10th March at Farbenmix will be available. The ingredients list follows at the end of the post, then let you have time to gather together everything you need.

Thanks so much for your great response to the camera bag. I have spent the last few weeks sewing, designing, discarding, calculating and photographing every single step as I go. I have consulted with colleagues, the written description, modified, edited and corrected and heart So obviously I am thrilled to bits that my work seems to be hitting your sewing! The tutorial is finished! It's just being tested by my lovely sewing friends, so that foto bella will be available on Thursday the 10th March at Farbenmix. Find the ingredients at the end of this post, so you have a bit of time to collect everything you need.

The bag has a lot of small details which I show you is still the dates, one of them is this belt pad which made it very quickly from a few small fabric, fleece and Webbandresten. The pattern is included in this ebook, but you can easily create yourself.

The bag has quite a few refinements niftly litlle, I'll show you more soon, one of them is this strap-pad made very easily and quickly from a few small fabric, fleece and ribbon remnants. The pattern is included in the tutorial, but you can easily create it yourself.

to Draw on a piece of paper the width of your belt, added on each side about 1 cm. The result is the short side. The long side should be about 15-20cm. You can download a simple rectangle or a shape with curved sides as in the photo feature.

On a piece of paper, draw the width of your strap add, about 1 cm on each side. The result is the short side of your rectangle .. The long side should be about 15-20cm. You can either draw a simple rectangle or a shape with curved sides as shown in the photo.

Now you take the template and cut each to a portion of upper textile, fabric and batting. The batting I always fix with spray glue on the left side of the fabric.

Now use the template and cut out one each of upper fabric, lining and batting. I always fix the batting with spray glue on the left side of the upper fabric.

Now she lays two Webbändstücke as shown on the upper part (the part that is to be seen wearing above) and puts it firmly with pins (do not use double-sided tape, as the bands so should not stick).

Now place two pieces of Ribon as shown on the upper side fabric (the side that is to be seen when you are wearing the bag) and pin (do not use double-sided tape, as the ribbon should not permamently stick).

fabric and background fabric right sides together and sew around. To make a short side of a turn opening of about 3cm. The cut corners and turn back cut the seams, and protrusions with a sharp object carefully the corners. thread on the belt. Done!

Place fabric upper and lining fabric right sides together (batting is on the back side of the upper fabric) and sew all the way around leaving at opening of about 3 cm on one short side for the flip later. Cut down the corners and cut back the seams, flip to right side and carefully press out the corners with a sharp object. T hread onto strap. Done!

Possibly. could now left and right of the belt or the belts attach backstitching colorful buttons, so the band can not slip.

Possibly you could now sew the ribbon on close to the left and right side of the strap or attach colorful buttons, so the strap will not slip around.

material

for the outside pocket

• 70cm Outer fabric (140cm wide) .... cotton, canvas, jeans, what your heart desires ....
• 70cm Lining (140cm wide)
• 120cm batting 1-2cm (90cm wide)
• 35cm material for the flap and attached bag (110cm/140cm wide)
• 60cm batting 0.5cm (90cm wide)
• 30cm 0.5 cm wide rubber band or ribbon 140cm
• 1 at least 40cm zipper
• Stylefix
• 150cm strap 4cm wide (or other width as required)
• 1 x harness adjuster
• 2 rings (D- rings, O-rings or Kunststoffgurthalter)
  
  

  • possibly magnetic closure, a small turn-lock (there are eg Kunterbunt )
  • ribbons if necessary, Applications for decorating

  • possibly metal eyelets

  • if Paspelband

  • possibly interfacing S520/feste Saddle Brake lining for added rigidity of the pocket

for the interior

• 65cm cotton
• 90cm Velcro (the hook and loop)
• 65cm batting 1-2cm

For the outside pocket

• 70cm Outer fabric (140cm wide) .... cotton, canvas, jeans, what your heart desires ....
• 70cm lining fabric (140cm wide)
• 120cm batting 1-2cm (90cm wide)
• 35cm fabric for the flap and attached bag (110cm/140cm wide)
• 60cm batting 0.5cm thick (90cm wide)
• 30cm 0.5 cm wide elastic or ribbon 140cm
• 1 min. 40cm zipper
• Stylefix or double-sided tape
• 150cm wide strap 4cm (or other width as required)
• 1 x strap adjuster
• 2 rings (D-rings, O-rings or plastic belt holders )  
   
  if desired.....
  
  
  

  • magnetic closure, a small turn-lock (available here Kunterbunt )  
  • ribbons, applications for decorating

  • metal eyelets

  • if necessary piping 

  • Vilene S520/feste may damage brake pad for greater stiffness of the bag

For the interior

• 65cm cotton fabric
• 90cm velcro (both hook and loop)
• 65cm batting 1-2cm

Have fun collecting!
Have fun collecting!